MSI E7210 Master-FARM 사용자 설명서 - 페이지 32

{카테고리_이름} MSI E7210 Master-FARM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI E7210 Master-FARM 34 페이지. (v1.x) atx server board

MS-9149 ATX Server Board

PNP/PCI Configurations

This section describes configuring the PCI bus system and PnP (Plug &

Play) feature. PCI, or Peripheral Compon ent Interconnect, is a system which

allows I/O devices to operate at speeds nearing the speed the CPU itself uses

when communicating with its special components. This section covers some

very techn ical items and it is strongly recommended that o nly experien ced

users should make any changes to the default settings.

Reset Configuration Data

Normally , you leave this field Disabled. Select Enabl ed to reset Extend ed

System Configuration Data (ESCD) when you exit Setup if you have installed

a new add-on card and the system reconfiguration has caused such a serious

conflict t hat the operat ing sy stem cannot b oot. Setting option s: En abled,

Disabled.

Res ource Controlled By

The Award Plug and Play BIOS has the capacity to automat ically con figure

all of the boot and Plug and Play compatible devices. However, this capability

means absolutely nothing unless you are using a Plug and Play operating sys-

tem such as Windows

95/98. If you set this field to "manual" choose specific

reso urces by going into each of th e sub menu that follows this field (a sub

menu is preceded by a "Ø"). The settings are: Auto (ESCD), Manu al.

3-24

IRQ Resources

The items are adjustable only when Resources Controlled By is set to Manual.

Press <Enter> an d you will enter the sub-menu o f the items. IRQ Res ources

list IRQ 3/4/5/7/9/ 10/11/12/14/15 for users to set each IRQ a type depending

on the type of device using the IRQ. Settings are:

PCI Device

For Plug & Play compatible devices designed for PCI

bus architecture.

Reserved

The IRQ will b e reserved for fu rther req uest.

BIOS Setup

3-25