MSI 1U12 사용자 설명서 - 페이지 30

{카테고리_이름} MSI 1U12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI 1U12 40 페이지.
MSI 1U12에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지)

Installing CPU & Heatsink

1. Place the processor carrier on top of the processor in the tray with their pin 1

indicators aligned. If installed properly, the CPU will snap into the carrier's side

latches and the carrier will latch firmly to it.

2. Remove the protective film at the bottom of the heatsink if any.

3. Make sure the heatsink has pre-applied thermal paste. If there isn't, you'll need to

apply thermal paste to the bottom center of the heatsink.

4. Check the heatsink for a diagonally cut corner or the #1clip on the heatsink label

if present. Align the processor Carrier's Pin 1 indicator with the heatsink's cut

corner (#1 clip), then gently press the heatsink down to engage the carrier's

latching mechanism to the heatsink at four corners.

CPU & Heatsink

Processor Carrier

(CPU Carrier)

Pin 1 indicators

⚠

Note

Please refer to the following table for the

corresponding CPU carrier.

CPU Package Type

Sapphire Rapids- SP XCC

Emerald Rapids- SP XCC

Sapphire Rapids- SP MCC

Emerald Rapids- SP MCC

Sapphire Rapids EE

Sapphire Rapids + HBM

Thermal paste

application area

CPU Carrier Code

E1A

E1B

E1C