MSI 1U12 사용자 설명서 - 페이지 32

{카테고리_이름} MSI 1U12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI 1U12 40 페이지.
MSI 1U12에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지)

7. Push the retention frame downward and use a torque screwdriver to tighten the

screw in the middle.

8. For peak thermal performance, apply proper amount of thermal paste to the

bottom center of the heatsink. (Skip this step if there is pre-applied thermal paste.)

9. Lower the heatsink until it rests firmly in place after aligning the six screw holes

on its bottom with the motherboard's studs.

10. Tighten all screws in diagonal sequence with a torque screwdriver.

To avoid damaging the fins of the heatsink, always grip the heatsink along the axis of

∙

the fins. Holding a heatsink along the side might damage its fins or solder.

Confirm if your heatsink is firmly installed before turning on your system.

∙

CPU & Heatsink

Torque Screwdriver Settings

Screw Head:

Torque:

12.5-15 kgf·cm*

*12.5-15 kgf·cm

= 122.6~147 N·m

= 10.9~13 lbf·in

Torx T20