MSI S2205 2U24 사용자 설명서 - 페이지 31
{카테고리_이름} MSI S2205 2U24에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI S2205 2U24 43 페이지.
페이지 인쇄
5. Make sure the attached clips on the carrier grab onto the heatsink and firmly
secure the carrier, CPU and heatsink as one Processor Heatsink Module (PHM).
6. Remove the socket cover by squeezing the finger grips in, then flip 4 anti-tilt wires
on the heatsink to the unlocked position (inward) and place the PHM on top of the
bolster plate with the Pin 1 indicators aligned. Hold the PHM horizontally, carefully
lower down to engage PHM to bolster the plate's alignment pin.
1
1
7. Flip 4 anti-tilt wires to the locked position (outward) and make sure the latches of
the wires are firmly secure.
3
3
4 x anti-tilt wires
4 x anti-tilt wires
locked
unlocked
2
2
CPU & Heatsink
31