Epson VS230 운영 매뉴얼 - 페이지 7
{카테고리_이름} Epson VS230에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson VS230 48 페이지. Warranty statement
Epson VS230에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (4 페이지), 적합성 선언 (4 페이지), 빠른 설정 (4 페이지)
페이지 인쇄Installing EasyMP Monitor
Installing EasyMP Monitor
Operating environment
This software is compatible with computers that comply with the
following requirements.
OS
Windows 2000 Professional SP4
Windows XP Home Edition SP2/SP3
Windows XP Professional SP2/SP3
Windows Vista
(All editions except Starter Edition)
Windows Vista SP1/SP2
(All editions except Starter Edition)
Windows 7 32 bit version
(All editions except Starter Edition)
Windows 7 64 bit version
Windows 8 32 bit version and 64 bit version
• Internet Explorer Ver. 5.0 or later must be installed.
CPU
Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)
Memory
64 MB or more (128 MB or more recommended)
capacity
Free hard disk
50 MB or more
space
Display
SVGA (800 x 600) or higher resolution, 32 bit or higher
display color
*
Supports only 32 bit version of OS.
• Macintosh computers cannot be used.
*
*
*
*
• Operations carried out at the computer may become slow depending
on the number of projectors being managed. If this happens, use a
computer with higher specifications.
• EasyMP Monitor cannot be used in environments which do not allow
pings to be transmitted.
Transferring the settings
If you are already using EasyMP or EMP Monitor, you can transfer the
projector settings to this version. The settings are stored as a data file
(EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you
install this software. EMP Monitor.dat can be found at the following
location if the default settings were used to install the software:
• If your operating system is Windows 2000 or Windows XP
"C:\Program Files\EPSON Projector\EasyMP (or EMP) Monitor Ver.
x.xx (Ver. x.xx represents the software version)"
• If your operating system is Windows Vista or Windows 7
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx
represents the software version)"
If you cannot find the "AppData" folder, click "Start" - "Control Panel"
- "Appearance and Personalization" - "Folder Options". Select "View"
tab, and then configure the "Show hidden files, folders, and drives"
setting in "Advanced settings".
7