Croydex Boston WS010122 매뉴얼 - 페이지 11

{카테고리_이름} Croydex Boston WS010122에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex Boston WS010122 12 페이지. Vanity unit
Croydex Boston WS010122에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

Installation

Drill the marked holes to a depth of 45mm.

Insert the wall plugs and loosely screw the

Step 19

Hang 'N' Lock into position through the

Hang 'N' Lock cams.

Installation

Step 21

Installation

Step 22

Using an 8mm drill, drill the marked holes through the

support braces.

Insert wall plugs and re-hang the vanity unit in

position aligning the holes in the support braces.

Using a philips screwdriver screw through the

braces to reinforce the vanity unit on the wall surface.

Installation

Step 20

Ø8

Support Brace

Hang the vanity unit onto the Hang 'N' Lock bracket, checking

the unit is level.

Using a pencil mark through the support braces and remove the

vanity unit.

IMPORTANT!

The support braces provide additional reinforcement to support

the weight of the vanity unit and basin. Reinforcement screws

must be secured through the support braces to provide

additional strength.

G. Wall Plugs

(H007) x 2

F. Fixing Screws

(H006) x 2

With the Hang 'N' Lock bracket loosely

attached to the wall, adjust for height and

screwdriver and align the bottom of the

Hang 'N' Lock bracket with the reference

line. Once level fully tighten using a philips

screwdriver.

Ø8

CAB 096 R01