Croydex MM720200E 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Croydex MM720200E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex MM720200E 7 페이지. Led illuminated mirror with demister pad
Croydex MM720200E에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지)
페이지 인쇄
POSITIONING THE MIRROR
1.
The mirror is rated IP44 and must only be installed
with the connection to the domestic mains electrical
supply in the Outside Zones, as shown in
2.
Ensure that the access to the domestic mains
electrical supply is located behind the intended
mounting position for the mirror and unobstructed by
the mounting brackets.
SECTION 2 - MOUNTING USING HANG 'N' LOCK
1.
Assemble the Hang 'n' Lock bracket sections
making sure all parts are slotted tightly
together.
(See Fig. 2)
Note: The width of the Hang 'n' Lock bracket
assembly may vary.
2.
Place the assembled Hang 'n' Lock bracket
onto the support slot on the back of the mirror
and hold in place. Measure the distance
from the bottom bracket to the top edge of
the mirror glass. Make a note of the 'Bracket
Distance' as it will help you when mounting your
mirror.
(See Fig. 3)
3.
Carefully hold your mirror in the desired
location on the wall and using a pencil make a
reference line along the top edge of the mirror.
Use the 'Bracket Distance' you measured earlier
to create a reference line where the bottom of
your Hang 'n' Lock bracket will be located.
(See Fig. 4)
fig. 1
Fig.
1.
fig. 2
fig. 3
Bottom Edge of Hang 'n' Lock Bracket
fig. 4
3
Top Edge of Mirror
Bracket
Distance
MIR 034 R04