Croydex MM720800E 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Croydex MM720800E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex MM720800E 7 페이지.

SECTION 4 - SECURING THE MIRROR

10.

Place the L bracket over the threaded hole

located at the bottom of the mirror. Using a pencil

mark the position of the L bracket onto the wall.

(See Fig. 11)

11.

Remove the mirror and place the bracket on the

mark and drill a hole in the centre of the slot on the

wall. Lightly screw the bracket to the wall, allowing

the bracket to be moved up and down the slot.

Remove the mirror to connect the electrical supply.

(See Fig. 12)

* Refer to SECTION 6 - CONNECTING THE ELECTRICAL SUPPLY before proceeding to

12.

With the mirror in place and connected to the

electrical supply, secure the L bracket to the mirror

using the bolt provided.

(See Fig. 11)

SECTION 5 - OPERATING INSTRUCTIONS

To turn the LED lights on or off, operate the touch switch on the front of the mirror glass.

SECTION 6 - CONNECTING THE ELECTRICAL SUPPLY

ENSURE THAT THE DOMESTIC ELECTRICAL MAINS SUPPLY TO WHICH THE MIRROR

IS TO BE CONNECTED IS TURNED OFF.

Connect the flexible mains supply cable on the mirror to the domestic electrical mains supply

ensuring that:

•

The Live (Brown) conductor is connected to the Live on the domestic electrical mains supply.

•

The Neutral (Blue) conductor is connected to the Neutral on the domestic electrical mains

supply.

•

The Earth (Green/Yellow) conductor is connected to the Earth/Ground on the domestic

electrical mains supply.

Note: Connection of the electrical supply MUST ONLY be carried out by a competent person in

accordance with the Building Regulations 2010 and connection to the fixed wiring of the mains

electrical supply must comply with the current revision of the IET Wiring Regulations BS 7671.

fig. 12

step 12 and fastening the mirror. *

fig. 11

MIR 034 R04