Croydex QA200021 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Croydex QA200021에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex QA200021 2 페이지. Black metal framed mirror with matt black chain
페이지 인쇄
SECTION 2 - INSTALLATION
INSTALLATION WITH CHAIN
1.
While holding the mirror up to
the wall via the chain - mark the
point at which the mirror should
hang from.
(See Fig. 1)
2.
Drill a 6mm hole in the marked
point.
(See Fig. 2)
3.
BEFORE HANGING THE MIRROR ENSURE THE WALL FIXING IS SECURE!
Hang the mirror from the wall fixing. Ensure the chain is of an
equal length on both sides to ensure that the mirror is level.
ENSURE THE MIRROR IS SECURELY HELD BEFORE LETTING GO!
(See Fig. 3A & 3B)
fig. 3A
fig. 1
fig. 2
fig. 3B
=
INSTALLATION WITHOUT
CHAIN
1.
Detach the split ring and chain
from the mirror. Then hold the
mirror up to the wall in the desired
position. Mark the location of the
top edge on the wall.
(See Fig. 4)
2.
Measure 90mm vertically down
from the marked line and mark
this location.
Then drill a 6mm hole and insert
the wall plug.
(See Fig. 5)
3.
BEFORE HANGING THE MIRROR
ENSURE THE WALL FIXING IS SECURE!
Hang the mirror from the wall
fixing using the keyhole slot on the
back.
ENSURE THE MIRROR IS SECURELY HELD
BEFORE LETTING GO!
(See Fig. 6)
2
fig. 4
fig. 5
90mm
fig. 6
MIR 046 R02