Dimplex XHD23L 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Dimplex XHD23L에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex XHD23L 16 페이지.
Dimplex XHD23L에 대해서도 마찬가지입니다: 서비스 매뉴얼 (14 페이지), 소유자 매뉴얼 (18 페이지), 서비스 매뉴얼 (14 페이지)

페이지 인쇄

1. Exploded Parts Diagram

Icon

Function

Brightness

Flame

Timer

Demo Mode

Certain versions of this firebox are equipped with a demo

mode where the unit cycles through several functions. The

demo mode is activated by pressing and holding the tem-

perature and brightness buttons for 2 seconds. In demo

mode, the display remains lit and none of the remote or on-

unit controls work. When power is cut to the unit and then

restored, the unit remains in demo mode.

Press to change the flame and logs brightness. Display will show b3, b1, b2

respectively.

• High

• Low

• Medium

Press to turn the flame effect On. Press again to turn the flame effect Off.

Press multiple times to change the sleep timer by 0.5 hr from 0.5 hr to 8 hr before

turning off. Press again, the remaining time on the timer displays.

Description

Resetting the Temperature Cutout Switch

Should the heater overheat, an automatic cutout will turn

the heater off. It will not come back on without being reset.

To reset the cutout switch, unplug the unit and wait 5

minutes before plugging it back in.

CAUTION: If you need to continuously reset the heater,

unplug the unit and call Technical Support at 1-888-346-7539