Croydex SIMPLICITY WC257222 매뉴얼 - 페이지 2

{카테고리_이름} Croydex SIMPLICITY WC257222에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex SIMPLICITY WC257222 2 페이지. Single door corner cabinet

페이지 인쇄

Assembly Instructions

Lay out all components so they are all clearly identifiable prior to assembly.

Remove excess adhesive with a damp cloth before it dries.

Support the doors during assembly and do not allow the doors to fall open, as this will damage the hinge.

1. Mount the magnetic door

catch to the top panel using

the magnetic catch screws and

ensure the magnetic door plate

is fitted to the mirror door using

the magnetic plate screw

provided. The door catch must

be fitted to opposite side of

door hinge.

5. Slide the two strengthening

batons into the channels at the

rear of the cabinet with the pilot

holes facing towards the top of

the cabinet. Not to be secured

into top panel at this stage.

9. Hold the cabinet against the wall

in its desired location and check that

it is straight and level. Open the

door(s) and mark the wall using the

holes in the back of the cabinet as a

guide. Drill 40mm deep holes in

marked positions using a 6mm

masonry drill and insert wall plugs.

Align the holes in the back of the

cabinet with the wall plugs. Insert the

screws through the washers and

holes in the back of the cabinet and

screw in position.

2. Secure side panel to base

panel using two fixing screws.

(Screws mounted from underside

of base. To improve strength

place small amount of glue on

underside of side panel before

securing into position.)

6. Place one of the door pivot

pins into hole recess situated on

the base panel. (The pivot pin

bush needs to be located in the

recess before inserting the pivot

pin) Locate mirrored door onto

pivot pin and place second pivot

pin into the top of the door before

securing the top panel.

10. Insert shelf supports into hole

recesses and ensure all supports

are aligned accurately. Place the

shelf in the cabinet and lower

onto the shelf supports. (Door not

shown.)

3. Secure side panel and back

panel to the base using 4 fixing

screws. (Screws mounted from

underside of base. To improve

strength place small amount of

glue on underside of side panel

before securing into position.)

1 2

7. Place top panel onto cabinet

carcase ensuring all screw holes,

recesses and pivot pin bush are

accurately aligned. Secure the top

panel to the side panels and back

panel. (Six fixing screws required.)

To improve strength place small

amount of glue on underside of side

panel before securing into position.)

Note

Door can be opened from either the left or right

side of the cabinet. To change the opening

orientation of the door move the hinge grommets

to the opposite side of the top and base panels

Product Care

To retain the best quality finish, clean product

regularly with a soft cloth and mild detergents. Do

not use abrasive or chemical cleaners, as these

will damage the product.

Do not slam the door open against its mechanical

limits, as this will damage the hinge.

For details of other items in the Croydex range

please visit our website: www.croydex.com

Croydex

Central Way, Andover, Hants, SP10 5AW, UK

4. Locate the backing boards into

the recesses on the side panels

and back panel. Screw fixing

holes to be positioned at the top

of the cabinet. (Note- if positioned

incorrectly the cabinet cannot be

hung.)

8. Slide the hanging batons up to

the top panel and secure into

position with the two remaining

fixing screws.

CAB 024 R06