Croydex WC257122 매뉴얼 - 페이지 2

{카테고리_이름} Croydex WC257122에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex WC257122 2 페이지. Small single door cabinet
Croydex WC257122에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지)

페이지 인쇄

Assembly Instructions

Lay out all components so they are all clearly identifiable prior to assembly.

Remove excess adhesive with a damp cloth before it dries.

Support the door during assembly and do not allow the door to fall open, as this will damage the hinge.

1. Mount the magnetic door catch onto

the top panel. Use all four magnetic

catch screws. Door catch must be fitted

to opposite side of door hinge. (The

magnetic door plate must be secured

to the back face of the mirrored door to

ensure that the catch works correctly)

4. Place the second side panel onto the

wooden dowels protruding from the

strengthening baton and secure side

panel to base panel using two fixing

screws. (To improve strength place small

amount of glue on underside of side panel

before securing into position. Mount

screws from underside of base.) Slide the

backing board into the two recesses

evident on the two sidewalls. Locate into

the base panel.

7. Place top panel onto cabinet

carcase ensuring all screw holes,

recesses, hinge grommets and

dowels are accurately aligned with

assembled cabinet. Secure top

panel to both side panels with the

four remaining fixing screws.

Important: Please allow the glue

to dry prior to fitting the cabinet.

Product Care

To retain the best quality finish, clean product regularly with a soft cloth and mild detergents. Do not use abrasive or chemical

cleaners, as these will damage the product.

Do not slam the door open against its mechanical limits, as this will damage the hinge.

For details of other items in the Croydex range please visit our website:

Croydex Limited, Central Way, Andover, Hants, SP10 5AW, UK

2. Secure side panel to base panel

using two fixing screws. (Screws

mounted from underside of base. To

improve strength place small amount

of glue on underside of side panel

before securing into position.)

5. Place one wooden dowel into

the top of the hanging baton.

(Wooden dowel must be glued into

position.)

8. Hold the cabinet against the wall in its

desired location and check that it is straight

and level. Open the door(s) and mark the wall

using the holes in the back of the cabinet as a

guide. Drill 40mm deep holes in marked

positions using a 6mm masonry drill and insert

wall plugs. Align the holes in the back of the

cabinet with the wall plugs. Insert the screws

through the washers and holes in the back of

the cabinet and screw in position.

3. Place two wooden dowels into

each end of the strengthening

baton. Align the dowels and locate

into side panel. (Wooden dowels

must be glued into position.)

6. Place one of the door pivot pins

into the hole recess situated on the

base. (Hinge grommets need to be

located in the recess of the top and

base panels before inserting the

pivot pin.) Locate mirrored door onto

pivot pin and place the remaining

pivot pin into the top of the door

before securing the top panel.

9. Insert shelf supports into hole

recesses and ensure all supports

are aligned accurately. Place the

shelf in the cabinet and lower onto

the shelf supports. (Door not shown)

www.croydex.com

CAB 022 R06