Dimplex 30" FIREPLACE 설치 및 운영 지침 매뉴얼 - 페이지 5

{카테고리_이름} Dimplex 30" FIREPLACE에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex 30" FIREPLACE 12 페이지. Thermocomfort mechanic storage heater
Dimplex 30" FIREPLACE에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Device Installation

1. Remove the packaging. Dispose of the packaging

material according to local regulations.

Screw the 2 lateral wall spacers to the device back panel.

Screw the upper wall spacer to the two lateral wall spacers.

2. Loosen the screws of the two side panels.

Push the side panels upwards by roughly 1/4" (5 mm) and

remove them horizontally.

After removing the side panels, loosen the fastening screws

of the front panel.

3. Swing open the front panel to the front and remove it from

the upper edging. Insert the electrical connecting lines and

provide strain relief.

Shorten the lines so that they do not touch any hot device

surfaces during operation. Do not route any cable loops

behind or below the device.

4. All heaters must be secured against tilting.

The installed device must be able to withstand a horizontal

pull of at least 45 lbf ( without tilting or moving. If the required

stability cannot be achieved using the accessories provided,

e.g. with light-weight walls, the heating technician must

choose a suitable wall fastening method.

English