Dimplex 403TSFTIE7 사용 설명서 - 페이지 6
{카테고리_이름} Dimplex 403TSFTIE7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex 403TSFTIE7 9 페이지. Convector heaters
페이지 인쇄
Use the +/- keys to set the weekday
Setting time block ON
•
press the ENTER key. P1 (period 1) and ON apprears. The hours
display flashes
•
Use the +/- keys to set the hours. Press the ENTER key. The
minutes display flahses.
•
Use the +/- to set minutes (in 10 minute increments)
Setting time block OFF
•
Press the ENTER key. P1 (program 1) and OFF appears. The hours
display flashes.
•
Use the +/- keys to set the hours. Press the ENTER key. The
minutes display flashes.
•
Use the +/- keys to set the minutes
Temperature setting
•
Press the ENTER key. Temperature setting appears
•
Use the +/- keys to set the temperature.
•
Press the ENTER key. P2 (program 2) and ON appears. The hours
display flashes.
The programs P2, P3 and P4 can be set in the same way.
NOTE: To exit the program early, press the PROG key
Copying Programs
To copy the newly set programs P1 - P4 to other days, proceed as follows.
•
After carrying out the Temperature Setting, press and hold the
ENTER key until COPY appears.
•
Press + to select more weekdays.
•
The selected weekdays are marked with a triangle displayed
permanently. The days Monday to Friday are selected on the screen
at the top. Deselect weekdays with the - key.
•
Press the ENTER key. The settings are saved. COPY flashes three
times. Setting is complete.
Frost Protection
In MANUAL OFF operating mode and Auto operating mode (time block
OFF), frost protection takes place. If the room temperature is 5° C or
less, the heating device is switched on automatically.
Adaptive Start
This function guarantees that, in automatic mode (week program), the
set room temperature is achieved exactly at the start of the switch-
on time.
Example:
In the timer menu, a set room temperature of 22°C is specified. The
current room temperature is 17° C. The heating device switches on early
so that the specified room temperature of 22° C is reached by 07:00.
For electrical products sold within the European Community. At the end of the electrical products useful life it should not be
disposed of with household waste. Please recycle where facilities exist. Check with a Local Authority or retailer for recycling advice
in your country. Batteries should be disposed of or recycled in accordance with WEEE Directive 2012/19/EU. Packaging should
be recycled where possible.
•
Use the MODE key to select the operating mode AUTO
•
Press and hold the + and - keys for three seconds
•
ECO appears
•
Activate / deactivate the function with the +/- keys:
•
ON = Adaptive start activated
•
OFF = Adaptive start deactivated
•
Press the ENTER key. Setting is saved.
Key Lock
This function can be used to lock the operating elements
•
Press and hold the ENTER key and MODE key for one second
•
The LOCKED key symbol appears in the display.
•
To unlock, press and hold the ENTER key and the MODE key at
the same time again
NOTE: No settings can be made if the key lock is activated
The turbo fan can be used to circulate the heat around the room to
help it reach the desired temperature more quickly. On this model with
the ON/OFF switch at ON position and the turbo switch in the OFF
position, there will be 2kW output from the convector (NOTE: 2kW is
only possible with turbo OFF). To activate 3kW output, turn ON the
turbo switch which will combine the 2kW setting with a 1kW fan boost
setting to give a total of 3kW with fan boost.
Recycling
Options