Croydex Prima AP400222 조립 지침

{카테고리_이름} Croydex Prima AP400222에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Croydex Prima AP400222 2 페이지. Modular shower stool

Assembly instructions for :-

AP400222 - Prima Modular Shower Stool

Thank you for purchasing this Croydex product. Please follow the assembly and care instructions

to ensure your shower stool is assembled safely and retains its high quality finish.

No tools are required to assemble this product although a blunt instrument may help the

removal of the seat caps.

A hex head key is supplied to re-tighten bolts on the underside of the seat if necessary.

Safety and Care Advice

1. This Shower Stool must only be used on a flat level surface.

2. It must only be used for sitting – DO NOT STAND ON THE SHOWER STOOL.

3. Ensure all parts are assembled correctly and are secure before use.

Product Assembly Instructions

1. The tubular components are assembled by depressing the spring-loaded buttons at the

ends of the tubes. Care must be taken not to pinch fingers when pressing the spring-

loaded buttons. (See Fig.1)

2. Depress the spring-loaded button at the end of the leg sub-assembly and insert into the

frame on the underside of the seat. Ensure the spring-loaded button engages fully with

the corresponding hole in the tube. (See Fig.2)

To fit the armrests, remove the plastic caps from the seat by releasing the catches

securing them to the underside of the seat moulding (See Fig.3), and discard them as

illustrated in Fig.4.

4. Remove the plastic retaining clips from the ends of the armrest tubes (See Fig.5) and

insert the tube ends into each side of the seat. (See Fig.6) Note the armrests are handed.

Fig.3

5. Rotate the armrests until they are vertical and align the plastic backrest with the tube

ends. Simultaneously depress the spring-loaded buttons on the tube ends and slide

through the backrest moulding. Ensure the backrest is in the correct orientation before

assembly. (See Figs.7 & 8)

6. Locate the ends of the armrests into the corresponding holes in the top of the seat and

push down to clip into position. (See Fig.8)

Fig.2

Fig.1

Fig.4

Fig.5

S&H 014 R04