3Com 3CRWEASY96A 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} 3Com 3CRWEASY96A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3CRWEASY96A 8 페이지. Wireless lan outdoor bridge solution

309-2273-001AA.fm Page 5 Monday, February 3, 2003 4:54 PM

Connect the Bridge to the Power Supply and

the LAN

You can connect to the LAN either through the 3Com power supply or through IEEE 802.3af power-

over-Ethernet compliant equipment.

Using the Power Supply

The power supply can be located indoors at any point between the bridge and the LAN access port

where an accessible power outlet exists.

Connect the cable coming from the bridge to the port labeled To Access Point on the power supply.

Connect another Ethernet cable from the port labeled To Hub/Switch on the power supply to an

Ethernet LAN port, as shown.

CAUTION: To avoid damaging network equipment, make sure that the cables are

connected from bridge to power supply to LAN as shown and described above.

Using a Power-Over-Ethernet LAN Port

If your LAN equipment complies with the IEEE 802.3af power-over-Ethernet standard, you can connect

the bridge directly to a LAN port. For example, the illustration shows the connection through a 3Com

Ethernet Power Supply to a 3Com SuperStack

Switch.