Dimplex BLF7451 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Dimplex BLF7451에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451 19 페이지.
Dimplex BLF7451에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)

페이지 인쇄

1. Operation

Operation

• Indicated by the

the intake temperature be-

ing displayed on the Floating

Display

, for 5 seconds before

turning off.

! NOTE: After the heater is

switched off, there is a 60 second

fan delay, where the fan will con-

tinue running before turning off.

! NOTE: The unit can be oper-

ated in Heat Only Mode. When

the unit is only running with the

heater, the

ously be displayed on the Floating

Display

! NOTE: The heater may emit

a slight, harmless odor when first

used. This odor is a normal con-

dition caused by initial heating of

internal heater parts and will not

occur again.

D & E.

Thermostat Controls

Adjusts the temperature set point

to your individual requirements.

Once the desired set temperature

is reached the heater will turn off.

The heater will cycle on and off

to maintain the desired set tem-

perature. The default temperature

setting is 72°F (22°C).

→ Adjusted by pressing the

icon and

icon will continu-

to decrease the setpoint and

the

to increase the setpoint

on the unit or the remote.

• The Floating Display

dicate the temperature setpoint

as it is adjusted.

! NOTE: Holding the

the

buttons down for two

seconds, on the unit, will change

the temperature from °C to °F, or

vice versa.

Disable Heat

If desired, depending on the sea-

son, the heater on the unit can be

disabled. The unit will operate in

the same fashion, with remainder

of the controls.

Pressing the

on the unit at the same time and

holding for 2 seconds will disable

and enable the heater.

! NOTE: When the heater has

been disabled and either the

or the

is pressed the Floating

Display

will indicate "--".

Color Themes

Different presets of ambient light-

ing color combinations contained

in the unit.

will in-

and

buttons