CRP NANO TANK 지침 - 페이지 2

{카테고리_이름} CRP NANO TANK에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CRP NANO TANK 2 페이지.

1. You should perform a partial water change at least once a month. The frequency of water changes

depends heavily on the amount of fish and invertebrates in your tank and your feeding rate.

2. Rinse out the filter pad at least once a week. Replace the filter pad as it becomes worn.

3. The Bio-Bale

filter media should be removed and cleaned every three months, or as needed. Remove

the Bio-Bale

and place it in a bucket of saltwater, preferably water from your Nano Tank . Gently

swish the Bio-Bale

before returning the Bio-Bale

Bale

and do not allow it to dry out. When placing the Bio-Bale

not to pack it too tightly.

4. Clean each powerhead at least once a month and replace the impeller assembly once a year for the

most efficient operation.

5. The outside of the Nano Tank may be cleaned with a non-abrasive cloth. Do not use detergents on

any surfaces that may come in contact with aquarium water.

Lighting

(optional)

Lid

around in the water to remove any algae or detritus. Shake off any excess water

to the filter chamber. Never use detergent of any kind on the Bio-

Maintenance

back into the filter chamber, be sure

Canopy

(optional)

Return Pump

Filter Pad

Netting

Bio-Bale