CRU Data Express 50 사용자 설명서

{카테고리_이름} CRU Data Express 50에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU Data Express 50 2 페이지. Sas/sata 6g removable enclosure

페이지 인쇄

Product Models

Data Express 50 SAS/SATA 6G Removeable Enclosure

Host Interfaces

SATA: up to 6 Gbps

Drive Types Supported

•

2.5" SATA Hard Drives (up to SATA Revision 3.0)

•

2.5" SAS Hard Drives (up to SAS Revision 2.0)

Data Connectors

One(1) SATA Revision 3.0/SAS connector

Operating System

•

Windows 8.1, 8, 7, and Vista

Requirements

•

Windows Server 2012, 2008, and 2003 product families

•

Mac OS X 10.4.x or higher

•

Linux distributions that support SATA

Torque

2.5-inch hard drives, M3 screws: 4 inch-pounds max.

Compliance

EMI Standard: FCC Part 15 Class B, CE

EMC Standard: EN55022, EN55024

Shipping Weight

1.83 pounds (includes accessories)

Product Dimensions

5.75in x 4.00in" x 1.00in" (146mm x 102mm x 26mm)

Technical Support

Your investment in CRU products is backed up by our free technical

support for the lifetime of the product. Contact us through our website,

cru-inc.com/support or call us at 1-800-260-9800 or +1-360-816-1800.

Group, LLC and are protected by trademark law.

Product Warranty

CRU warrants this product to be free of significant defects in material and workmanship for a period of three years from the

original date of purchase. CRU's warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including

but not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-

party rights with respect to the documentation and hardware. No CRU dealer, agent, or employee is authorized to make any

modification, extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement

of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect,

consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service,

even if CRU has been advised of the possibility of such damages. In no case shall CRU's liability exceed the actual money paid

for the products at issue. CRU reserves the right to make modifications and additions to this product without notice or taking

on additional liability.

FCC Compliance Statement: "This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation."

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a home or commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

Ensure that the case of your attached drive is grounded.

Use a data cable with RFI reducing ferrites on each end.

Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

Reorient or relocate the receiving antenna.

A7-050-0007-1 Rev. 1.1

DataExpress Branding

and CRU

are trademarks of CRU Acquisition

FOR HOME OR OFFICE USE

CRU Data Express

SAS/SATA 6G Removable Enclosure

Thank you for purchasing CRU's Data Express 50 SAS/SATA 6G Removable

Enclosure. The Data Express 50 is a reliable and versatile enclosure

constructed of solid steel and plastic. This product is created specifically for

2.5" SAS and SATA drives and is designed to fit into any 3.5" floppy or 5.25"

peripheral bay. The receiving frame offers 6 Gbps performance when used

with a SATA Revision 3.0 drive and host configuration. It is also compatible

with older SATA drive and host configurations.

Features

•

Removable carrier allows quick and easy access to drives for hot

swapping or data mobility

•

The mechanical keylock on the frame turns the unit on and locks

the carrier into place, preventing accidental ejection

•

Receiving frame interconnect rated for 25,000 insertions

•

Transfer data up to 6 Gbps using a SATA Revision 3.0 drive and

host configuration