CRU QX118 사용자 설명서 - 페이지 8
{카테고리_이름} CRU QX118에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU QX118 20 페이지. Receiving frame
CRU QX118에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)
페이지 인쇄
IMPORTANT
If you are installing the QX118 into a 9.5mm optical drive bay, please note that the
forward screw holes on the QX118 will not line up with the screw holes on a 9.5mm
bay, but the rear screw holes will.
4.
Connect the included SATA power adapter cable to the rear of the QX118. Then connect SATA power
from your computer to the adapter cable.
5.
If necessary, install a host bus adapter card (HBA) with at least one (1) OCuLink port into your com-
puter. Refer to the HBA's user manual for installation instructions.
6.
Connect an OCuLink SFF-8611 cable (sold separately) to your HBA.
7.
Connect the other end of the OCuLink cable to the OCuLink port on the rear of the QX118.
QX118 Receiving Frame User Manual
8