CRU WiebeTech Forensic ComboDock 빠른 시작 매뉴얼

{카테고리_이름} CRU WiebeTech Forensic ComboDock에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU WiebeTech Forensic ComboDock 2 페이지.

페이지 인쇄

CRU WiebeTech Forensic ComboDock 빠른 시작 매뉴얼

Product Models

Forensic ComboDock (Model: FCDv5.5)

Drive Interface Types &

PATA/IDE: up to 133 MB/s

Speeds

SATA (with eSATA cable): up to 6 Gbps

Host Interface Types &

eSATA: up to 6 Gbps

Speeds

USB 3.0: up to 5 Gbps

FireWire 800: up to 800 Mbps

USB Micro-B: up to 480 Mbps (Admin configuration only)

Drive Types Supported

2.5" and 3.5" rotational and solid state SATA drives

3.5" rotational IDE/PATA drives

2.5" rotational IDE/PATA drives*, Hitachi 1.8" drives*, Toshiba 1.8" drives*,

MacBook Air 2010*, MacBook Air 2011*, mSATA*, mini PCIe PATA*, mini

PCIe SATA*, mini PCIe USB*

*Requires the appropriate CRU SATA or PATA adapter

Host Data Connectors

One (1) USB 3.0 connector (backwards compatible with USB 2.0)

One (1) eSATA connector

Two (2) FireWire 800 connectors

Supported Operating Systems

Windows 10, 8, 7, and Vista

Windows Server 2012 and 2008 product families

Mac OS X 10.4.x or higher (USB 3 requires 10.8 or later)

Linux distributions that support the connection type used

Compliance

EMI Standard: FCC Part 15 Class A, CE

EMC Standard: EN55022, EN55024

RCM

Product Weight

0.4 pounds (0.18 kg)

Product Dimensions

2.95" x 4.33" x 1.06" (75mm x 110mm x 27mm)

Technical Support

Your investment in CRU products is backed up by our free technical support

for the lifetime of the product. Contact us through our website,

support

or call us at 1-800-260-9800 or +1-360-816-1800.

are protected by trademark law.

Product Warranty

CRU warrants this product to be free of significant defects in material and workmanship for a period of two years from the original date

of purchase. CRU's warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not lim-

ited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect

to the documentation and hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to

this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services, lost profits,

loss of information or data, computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way

out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the possibility of such damages.

In no case shall CRU's liability exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and

additions to this product without notice or taking on additional liability.

FCC Compliance Statement:

"This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation."

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at this own expense.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

Ensure that the case of your attached drive is grounded.

Use a data cable with RFI reducing ferrites on each end.

Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

Reorient or relocate the receiving antenna.

Part Number: A9-000-0056-1 Rev. 1.1

cru-inc.com/

and WiebeTech

are trademarks of CRU Acquisition Group, LLC and

FOR OFFICE OR COMMERCIAL USE

Protecting Your Digital Assets

CRU

WiebeTech

Quick Start Guide

Features

•

Select either Write-Blocked or Read-Write mode on startup

•

Compatible with CRU's Forensic Software Utility application

•

Four separate host attachment options (USB 3.0, USB 2.0, FireWire 800, and eSATA)

for compatibility with virtually any computer

•

Multiple LEDs indicate operational status, including disk activity, hidden area

detection, error state, and the status of power input and output

•

LCD menu allows user to configure settings and view information on attached drives

•

Able to detect and create hidden areas (HPAs or DCOs) found on hard drives

•

Aluminum case for rugged durability and excellent heat dissipation

•

Compatible with forensic acquisition and analysis software

Forensic ComboDock

Wiebetech Branding

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz