CRU Dataport DE75i-SW160 설치 매뉴얼

{카테고리_이름} CRU Dataport DE75i-SW160에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU Dataport DE75i-SW160 2 페이지. Removable scsi wide ultra160 drive enclosure

DE75i-SW160 Install Guide

Removable SCSI Wide Ultra160 Drive Enclosure

NOTE: For SCSI Ultra160 operation, the Ultra160 DE75's require

Ultra160 chassis and cabling.

Drive Installation Overview

Figure1: Drive Installation Overview

Rugged, Reliable, Mobile, Secure

Option Pins

Remote Unit ID Selection: Pins 1-8 of this connector are provided for

remote unit SCSI ID selection through the computer system. Remote ID

selection requires that the unit ID switch located on the inside of the

receiving frame be set to "0" (onboard ID selection is set with a switch

located on the inside of the receiving frame – see Selecting the Unit

ID Number section.

Remote Activity LED: Pins 11 & 12 provide power for a remote LED

device activity indicator.

Jumpers: Installed at factory - Do Not Remove!

Figure 2: Receiving Frame Motherboard

1-800-260-9800