CRU Dataport RTX115-3Q 사용자 설명서 - 페이지 5

{카테고리_이름} CRU Dataport RTX115-3Q에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU Dataport RTX115-3Q 9 페이지. Storage enclosure

CRU

4. Usage with Mac and Windows Operating Systems

4.1 Usage with Mac OS X

To format, use Disk Utility (pictured below), which can be found in the Applications folder.

a) Click on the drive in the window to the left.

b) Click the Erase tab in the window to the right.

c) Select the format type. Most users prefer Mac OS Extended with Journaling (HFS+), which is required

for compatibility with Time Machine (OS 10.5 or newer). If you need to use your RTX with both Mac and

Windows computers, select MS-DOS File System instead.

d) Enter a name for the new volume and then click "Erase" to start the process.

If the hard drive installed in the RTX is already formatted, an icon

representing the drive's volume will appear (mount) on the desktop. You

can begin using the volume right away. If the drive is unformatted, a

message will appear on the desktop saying that the disk is unreadable.

Use OS X's Disk Utility to easily format the drive (see section above).

Unmount the volume before powering down the unit by dragging the

volume's icon to the trash bin, or by selecting the volume then pressing

Command-E. Disconnecting the unit without first unmounting the volume

can result in data loss.

To activate this feature, you must first install OS X on the hard drive in your carrier. The easiest way to do

this is to clone an existing system drive using a utility such as Carbon Copy Cloner or Super Duper. Next,

go to System Preferences  Startup Disk. A window will list the available bootable volumes. Select the

volume from which you wish to boot. Another method is to hold down the Option key during boot up. A

screen should appear that allows you to select the volume you wish to use. This is useful if you are only

sporadically booting from the RTX hard drive.

R T X 1 - B a y - 3 Q U s e r M a n u a l A 9 - 1 1 0 - 0 0 0 1 R E V 2 . 0

The drive in the window to the left is highlighted and

denoted with the letter A, and the Erase tab in the center

of the window is highlighted and denoted with the letter

B, corresponding to the steps above in which each item

is mentioned.

- 5 -