aeolus BTS-131E 사용자 설명서 - 페이지 4
{카테고리_이름} aeolus BTS-131E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aeolus BTS-131E 5 페이지. Stainless steel electric bathing tub
5. Put the Drain Head (H) in the Tub Basin (B), and bolt the Drain Head (H) to Drain Hose
w/Hoop (I) securely
6. Lay both Plastic Floorboards (D) and Plastic Puppy Riser (E) into the Tub Basin.
- 4 -
Operation Instructions
1. Plug in the tub.
2. To bathe large breeds or older dogs, step on the down pedal to lower the tub and open the
front door. To bathe small breeds, step on the up pedal to raise the tub to a suitable level for
user's stature (and/or by adding a booster rack).
3. Start then bath.
4. After the bath, let the water out of the tub and take the animal out.
5. Unplug the tub and clean it with a cloth.
Parts Replacement
Electric motor replacement
1. Disconnect the powder cord from the wall socket. Remove the tabletop from the frame
assembly, and set it aside. Remove the grooming arm.
2. Disconnect the electric motor cable from the motor control unit. Remove the snap rings and
the retaining bolts that hold the electric motor to the frame assembly. (See Figure 1 and 2)
3. Using help, lift he frame assembly up, and remove the entire motor assembly from the
frame.
4. Install the new motor assembly in the reverse order. Reconnect the cable to the motor
control unit.
5. Plug the power cord into a wall socket and test the table for proper operation.
Electric motor mount
snap ring
Figure 1
Electric motor
mount
Figure 2
- 5 -