CRU Rax RAX Secure 3QJp 사용자 설명서 - 페이지 5

{카테고리_이름} CRU Rax RAX Secure 3QJp에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU Rax RAX Secure 3QJp 7 페이지.

페이지 인쇄

select Initialize Disk. If you are prompted to select

a partition type, select GPT. Only select MBR if you

are formatting a bootable disk for use on a system

with a legacy BIOS or are using the RAX unit with

Windows XP.

c. To format the volume, right-click the Drive

Properties Box (labeled 'C' in the picture below)

and select New Partition... (Windows XP) or New

Simple Volume... (Windows Vista, 7, 8.1, Server

2008 and 2012 product families).

d. Unless you wish to customize the settings in these

dialog prompts, click Next on the Select Partition

Type (shows up in Windows XP only), Specify

Volume/Partition Size, and Assign Drive Letter or

Path dialog prompts, leaving the default settings.

e. You will now see a window that allows selection of a

file system. Choose NTFS and enter a name for the

new volume. Be sure to check the box labeled Quick

Format, which will ensure that the formatting

process takes less than a minute.

Click Next and then Finish to start the format

process. When the format is complete, the Drive

Properties Box will update to show the new volume

name. The new volume can now be found by double-

clicking on the My Computer icon on the desktop

(Windows XP), by clicking on the Computer button

in the Start Menu (Windows Vista, 7, Server 2008

product family), by clicking on Computer in the

navigation pane of a File Explorer window (Windows

Server 2012), or by opening a File Explorer window

(Windows 8.1, Server 2012 R2).

4.2.2 Mounting and Unmounting Volumes

If the hard drive inside of the RAX unit are already

formatted, you can begin using the volume right away.

When the RAX unit is properly connected and turned on,

a window may open to allow you access to the volume. If

no window appears, find the volume by double-clicking

on the My Computer icon on the desktop (Windows

XP), by clicking the Computer button in the Start

Page 5

Menu (Windows Vista, 7, Server 2008 product family), by

clicking on Computer in the navigation pane of a File

Explorer window (Windows Server 2012), or by opening a

File Explorer window (Windows 8.1, Server 2012 R2).

Unmounting a USB or Firewire Volume

Unmount the RAX unit before powering it down by

left-clicking the green arrow icon on the task bar (in

Windows XP) or the USB plug icon with the green

checkmark on the Desktop task bar (Windows Vista, 7,

8.1, Server 2008 and 2012 product families), and then

selecting the proper device from the menu that pops

up. You may have to click on the Show Hidden Icons

arrow on the task bar to find the correct icon. Windows

will indicate when it is safe to disconnect the RAX unit.

Disconnecting the RAX unit without first ejecting it can

result in data loss.

Unmounting an eSATA Volume

If you purchased an eSATA host card that supports

hot-swapping, follow the instructions for unmounting a

USB or FireWire volume above. Many eSATA hosts do

not support this feature. However, freeware utilities are

available on the Internet that provide a similar function.

You may download one of these utilities or follow these

instructions: Ensure no file transfers are taking place by

making sure the Bay Access/Drive Activity LEDs are not

blinking, as disconnecting the unit while a file transfer

is in progress can result in data loss. Then disconnect

power to the RAX unit. You may need to restart your

computer in order to remount the RAX unit.

5 Rack Mounting Warnings

Elevated Operating Ambient Temperature: The operating

ambient temperature of the rack environment may be greater

than the room ambient temperature if the unit is installed in

a closed or multi-unit rack assembly. Install the equipment

in an environment compatible with the maximum ambient

temperature of 40° C.

Reduced Air Flow: Do not block or inhibit the air flow required

for safe operation of the unit.

Mechanical Loading: Ensure that the unit is secure and level

in the rack.

Circuit Overloading: Do not overload the circuits. Refer to the

name plate ratings on the equipment.

Reliable Grounding: Maintain reliable grounding of rack-

mounted equipment by using indirect connections to the

branch circuit (i.e. UPS battery backups, power strips).

Removing the Cover: Turn off and unplug the unit before

removing the cover.

CRU Mark

10.25.12

PMS 711

2 cyan