Cruise N Comfort HD 24s 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} Cruise N Comfort HD 24s에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cruise N Comfort HD 24s 7 페이지. 12 volt air conditioners
Cruise N Comfort HD 24s에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (11 페이지)

페이지 인쇄

15. Connect 1/4 tubing to the 2 brass fittings on the evaporator tray. run

the tubes to the outside of the vehicle.

16. At this point the unit will need to be evacuated and charged with

R134a Refrigerant by a licensed Automotive Refrigerant technician.

17. DO NOT ADD A OIL CHARGE WHEN INITIALLY CHARGING

THIS UNIT.

18. IF A OIL CHARGE NEEDS TO BE ADDED LATER AFTER A

FEW EVACUATIONS THEN PVE OIL CAN BE USED. PVE IS NON

CONDUCTIVE. IF PAG OIL IS USED IT WILL SHORT AND RUIN

THE COMPRESSOR.

Turn the unit on . It takes approximately 10-15 minutes for the unit to

reach maximum cooling capacity.

Caution: Make certain all connections are secure. Fuses are located on

the front unit. If the unit fails to turn on, check to see that all fuse's are

good. NEVER operate unit without top cover in place!! Improper

Servicing can lead to fire, electrocution, or explosion. Never service,

repair or troubleshoot a system unless you are a professional service

person. Bi monthly check internal flexible lines for leaks and repair or

replace if necessary. When the unit is not being used for a few days trip

the circuit breaker to cut power to the unit to prevent battery drain.

Additional parts required

(not included with the unit)

Page