Cruise N Comfort MES 24 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} Cruise N Comfort MES 24에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cruise N Comfort MES 24 7 페이지. 12volt marine air conditioners

This unit is NOT explosion proof!! NEVER operate unit without

cover in place and secured!!

15. Secure all hoses and wires using tie wraps. Be careful not to restrict

water flow or have moving parts come in contact with wires or hoses.

Place boat in water or connect water source to inlet fitting. Turn the unit

on . Water should begin to flow in 10-15 seconds. It takes approximately

10-15 minutes for the unit to reach maximum cooling capacity.

Remember if the pump can not pickup water when moving then the unit

will not operate.

Caution: If water does not begin to flow within 1 minute shut unit off

and check all connections. Check for leaks and make certain all

connections are secure. Fuses are located inside the unit. If the unit fails

to turn on, check to see that all fuse's are good. NEVER operate unit

without top cover in place!! Improper Servicing can lead to fire,

electrocution, or explosion. Never service, repair or troubleshoot a

system unless you are a professional service person. Bi monthly check

internal flexible lines for leaks and repair or replace if necessary.

Note: All Electric and refrigerant charging and recovery needs to be done by a qualiﬁed

individual.

Additional parts required

Qty. 12 -1" hose clamps

Qty. 4 gauge ring terminals

Qty. 1-Ball Valve brass 1/2"

Qty. 1

Underwater marine sealant

Qty. 1-female 1/2" NPT to 1/2" nipple brass fitting

Qty. 1- male 1/2" NPT to 1/2" nipple brass fitting

Page