Dimplex Bari BAR20 사용 설명서 - 페이지 4

{카테고리_이름} Dimplex Bari BAR20에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex Bari BAR20 8 페이지. Optiflame stove fire
Dimplex Bari BAR20에 대해서도 마찬가지입니다: 사용 설명서 (4 페이지)

페이지 인쇄

1. Maintenance

Dimplex Optiflame Stove Fire

Models: B

FD20, BFD20E, BFD20PB, SBN20, SBN20E, BFD20BRG, BFD20SL, BAR20

Thank you for choosing a Dimplex electric fire.

General Information

Unpack the heater carefully and retain the packaging for possible future use, in the event of

moving or returning the fire to your supplier.

These models are designed to be free standing and are normally positioned against a wall.

The fire incorporates a flame effect, which can be used with or without heating, so that the

comforting effect may be enjoyed at any time of the year. Using the flame effect on its own only

requires little electricity.

A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom

of the unit.

Before connecting the heater check that the supply voltage is the same as that stated on the

heater.

Please note: Used in an environment where background noise is very low, it may be possible to

hear a sound which is related to the operation of the flame effect. This is normal and should not

be a cause for concern.

Technical Information

Model No:

BFD20, BFD20E, BFD20PB, SBN20, SBN20E, BFD20BRG, BFD20SL, BAR20

Heat Output

Nominal Heat Output

Minimum Heat Output

Maximum Continuous Heat Output

Auxiliary Electricity Consumption

In Standby Mode

with mechanic thermostat room temperature control.

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

This heater must be used on an AC ~ supply only and the voltage marked on the heater must

correspond to the supply voltage. Before switching on, please read the safety warnings and

operating instructions.

230V

1.7

Nom

0.8

min

1.7

max,c

0.02

240V

1.8

0.9

1.8

0.02