Dimplex DMCS13R 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Dimplex DMCS13R에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex DMCS13R 12 페이지.
Dimplex DMCS13R에 대해서도 마찬가지입니다: 소유자 매뉴얼 (11 페이지)

페이지 인쇄

1. Operation

Operation

NOTE: The Main On/Off

Switch must be set to On for

the Low Heat or High Heat

Switch to operate.

The Low Heat Switch must be

in the On " I " position for the

High Heat Switch to operate.

Resetting the Temperature

Cutoff Switch

Should the heater overheat, an

automatic cut out will turn the

Maintenance

WARNINg: Disconnect

power before attempting any

maintenance or cleaning to

reduce the risk of fire, electric

shock or damage to persons.

Light Bulb Replacement

Allow at least five (5) minutes for

the light bulb and heater to cool

off before touching the bulb to

avoid accidental burning of skin.

The light bulb will need to be

replaced when the flame effect is

heater off and it will not come

back on without being reset. It

can be reset by switching the

Main On/Off Switch to Off and

waiting five (5) minutes before

switching the unit back on.

CAUTION: If you need to

continuously reset the heater,

unplug the unit and call

technical support at

1-888-346-7539.

no longer visible. There is one (1)

bulb under the ember bed which

generate the flames and embers.

Light Bulb Requirements

Quantity of 1 clear chandelier

or candelabra bulb with a

E-12 (small) socket base, 60

Watt rating. Example GE

60BC or Philips 60

Do not exceed 60 Watts

CTC.