Dimplex DS5804 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Dimplex DS5804에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex DS5804 13 페이지. Electric
Dimplex DS5804에 대해서도 마찬가지입니다: 실용적인 사용자 설명서 (11 페이지), 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

tween the end of the connector and the heater to release the

wires.

19. Properly orient the new heater assembly and connect all

of the wiring clips and connections.

20. Reassemble in the reverse order as above.

Mod C and Higher

Tools Required: Philips head screwdriver

Flat head screwdriver

WARNING: If the fireplace was operating prior to servic-

ing, allow at least 10 minutes for light bulbs and heating ele-

ments to cool off to avoid accidental burning of skin.

WARNING: Disconnect power before attempting any

maintenance to reduce the risk of electric shock or damage

to persons.

1. Remove the stove pipe kit (if equipped).

2. With the front door closed, gently place the stove, door

side up on a flat surface.

3. Remove the heater assembly retaining screws located

on the bottom of the stove with a screwdriver.

4. Lower the heater assembly off of the bottom of the stove

being careful not to damage any of the wiring.

5. Disconnect the wiring clips and connections noting their

original locations.

NOTE: Use a flat head screwdriver to gently pry be-

tween the end of the connector and the heater to release the

wires.

6. Remove the heater assembly mounting screws and

remove the heater assembly.

7. Properly orient the new heater assembly and connect all

of the wiring clips and connections.

8. Reassembly in the reverse order as above.