Dimplex MILANOef EDS7001F 부품 및 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Dimplex MILANOef EDS7001F에 대한 부품 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex MILANOef EDS7001F 17 페이지. Dimplex milano stove parts and service manual
Dimplex MILANOef EDS7001F에 대해서도 마찬가지입니다: 부품 및 서비스 매뉴얼 (17 페이지)

페이지 인쇄

EDS7001F

If the unit was operating prior to servicing allow at least 10 minutes for light bulbs and

heating element to cool off to avoid accidental burning of skin.

Disconnect power before attempting any maintenance or cleaning to reduce the risk of

electric shock or damage to persons.

TO REPLACE FLAME MOTOR/FLAME ROD

14. Remove the flame rod from the flame motor by pulling the end of the rod to the

left and cut the reflector spring with wire cutters. DO NOT TAKE THE

LEFTOVER SPRING OFF THE END OF THE REFLECTOR ROD

15. Remove the (2) motor mounting screws with a short handled screw driver.

16. Discard the old flicker motor.

17. Pick up the 1 ½" rubber sleeve and locate over remaining spring on reflector rod.

ENSURE TO LOCATE THE LARGE OPENING OF THE RUBBER SLEEVE

OVER THE REMAINING SPRING OF THE REFLECTOR ROD.

18. Properly orientate the flame motor and connect all of the wiring clips and

connections in their original locations.

19. Reassemble in the reverse order as above.