Dimplex Stockbridge SKG20BL 사용 설명서 - 페이지 4

{카테고리_이름} Dimplex Stockbridge SKG20BL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex Stockbridge SKG20BL 8 페이지. Stove fire
Dimplex Stockbridge SKG20BL에 대해서도 마찬가지입니다: 설치 및 운영 지침 (5 페이지), 사용 설명서 (4 페이지)

페이지 인쇄

Dimplex Optiflame Stove Fire

Models: Stockbridge SKG20BL/SKG20BLN, Chevalier CHV20/CHV20N

Thank you for choosing a Dimplex electric fire.

General Information

Unpack the heater carefully and retain the packaging for possible future use, in the event of

moving or returning the fire to your supplier.

These models are designed to be free standing and are normally positioned against a wall.

The fire incorporates a flame effect, which can be used with or without heating, so that the

comforting effect may be enjoyed at any time of the year. Using the flame effect on its own only

requires little electricity.

A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom

of the unit.

Before connecting the heater check that the supply voltage is the same as that stated on the

heater.

Please note: Used in an environment where background noise is very low, it may be possible to

hear a sound which is related to the operation of the flame effect. This is normal and should not

be a cause for concern.

Technical Information

Model No:

SKG20BL, SKG20BLN, CHV20, CHV20N

Heat Output

Nominal Heat Output

Minimum Heat Output

Maximum Continuous Heat Output

Auxiliary Electricity Consumption

In Standby Mode

with mechanic thermostat room temperature control.

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

This heater must be used on an AC ~ supply only and the voltage marked on the heater must

correspond to the supply voltage. Before switching on, please read the safety warnings and

operating instructions.

Operating The Product

Controls - see Fig. 2

These main ON/OFF switch must first be turned ON to operate any of the other controls.

Setting

Flame Effect

Flame Effect & 1kW heat

Flame Effect & 2kW heat

To turn off any of the settings

Nom

min

max,c

Operation

Press the 'I' button once

Press the 'I' button again

Press the ' ' button once.

230V

240V

1.7

1.9

0.9

1.7

1.9

0.38

0.41

Indication

Bottom Neon

Bottom & middle neon

All 3 neons