ARIONA POOLS ALBORAN Series 지침 및 유지보수 매뉴얼 - 페이지 8
{카테고리_이름} ARIONA POOLS ALBORAN Series에 대한 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARIONA POOLS ALBORAN Series 12 페이지.
페이지 인쇄3. OPERATION
Before opening or closing the valve manifolds, it is essential to always turn off the
pump and ensure that there is no water flowing inside the pipes.
3.1. FILTRATION
The valve manifolds must be placed in the following position:
FILTRATION
VALVE
1
2
3
4
5
Periodically check the pressure differential between the inlet and outlet
connections. When this reaches 0.8 - 1.0 bar, the filter will need to be cleaned.
3.2. CLEANING
CLEANING
VALVE
1
2
3
4
5
In order to properly clean the filter, a flow of 40-50 m3/h/m2 is recommended
for filters equipped with collector arms, and up to 60 m3/h/m2 for filters with a
nozzle plate.
The maximum flow for cleaning is limited by the speed of the maximum flow
allowed through the pipes of the valve manifold, depending on the diameter.
Filters equipped with a nozzle plate can be cleaned with air as well as water. The
8
3
POSITION
OPEN
4
CLOSE
CLOSE
5
TO POOL
CLOSE
OPEN
EXTERNAL VIEW
3
POSITION
TO DRAIN
CLOSE
4
OPEN
OPEN
5
CLOSE
CLOSE
EXTERNAL VIEW
1
FROM PUMP
2
INTERNAL VIEW
1
FROM PUMP
2
INTERNAL VIEW