Crutchfield 000MVGUIDE 설치 매뉴얼 - 페이지 4

{카테고리_이름} Crutchfield 000MVGUIDE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crutchfield 000MVGUIDE 7 페이지.

MVGUIDE

Overhead Monitors

The components of your mobile video system include a DVD player

(or VCR), a video monitor and a sound component (usually wireless

headphones). The optional Crutchfield wiring kit (available Fall 2004)

has all the parts you'll need to power these components.

System Layout

A system using an overhead monitor is shown with suggested locations

for components and wire routing (Figure 1). Examine your vehicle to

determine the best mounting locations.

Mounting Components

An overhead monitor secures to the center ceiling. Be sure it is

located for easy viewing by rear passengers (Figure 2). Use the

instructions and hardware supplied with each component to secure

them in the desired locations.

Wire Routing

All system wiring should be concealed for safety and to give your

installation a nice finished look. Wires should be secured so that they

do not interfere with safe vehicle operation. Depending upon the

vehicle, the wiring for your system may need to be run under the dash,

door scuff plate, pillar trimpanel, kickpanel, or headliner. See page 6

for details showing how these trimpanels are typically removed. It will

be necessary to run a power wire to the main fuse panel of the vehicle

(see page 7).

Wiring Connections

The optional Crutchfield wiring kit (available Fall 2004) contains a main

power wire, ground wire, terminal blocks and other accessories for a

making power connections to your vehicle. See a full layout of compo-

nents on page 7.

FIGURE 1

DVD Player

Overhead Monitor

FIGURE 2

Overhead Monitor with wiring routed

behind Headliner and down Pillar Trimpanel

Pillar Trimpanel

Fuse Panel

(location depends

upon vehicle)

Kickpanel

Scuff Plate

Power Terminal