Dimplex ML2TSFA 사용 설명서 - 페이지 6

{카테고리_이름} Dimplex ML2TSFA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex ML2TSFA 12 페이지. 2kw convector heater series

Assembly

WARNING: DO NOT USE THE HEATER UNTIL THE FEET ARE FITTED CORRECTLY.

WARNING: ALWAYS ENSURE THAT THE HEATER IS STOOD ON A FIRM LEVEL

BASE NEAR TO, BUT NOT DIRECTLY UNDERNEATH A SUITABLE MAINS SUPPLY

SOCKET.

WARNING: ENSURE THAT CURTAINS AND FURNITURE ARE NOT POSITIONED

CLOSE TO THE CHOSEN POSITION

WARNING: PLEASE ENSURE THE MINIMUM CLEARANCE DIMENSIONS ARE

MAINTAINED

Note: These heaters are designed for operation on an AC electricity supply, and are

suitable for use in domestic dwellings and similar indoor locations. These heaters

are supplied with feet and handles for ease of movement. A mechanical rotary

switch provides the ability to choose an available heat output and control the room

temperature. These heaters are supplied with a cord and plug and are ready for use

once the feet have been correctly fitted.

Note: The ML Convector Series can only be used as portable heaters.

1. To install the feet, lay the heater on its back and remove the two foot fixing screws.

2. Assemble the feet by pressing them firmly into the convector body. The feet

should clip into position.

3. Secure the feet into the convector body with the two foot fixing screws. Return

the heater upright, and the unit is now ready for use.