ARIS LINEARIS CL 사용 설명서 - 페이지 4

{카테고리_이름} ARIS LINEARIS CL에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARIS LINEARIS CL 16 페이지. Damper actuator

1.2

Guidelines and standards

ARIS actuators are partly completed machinery according to directive 2006/42/EC. This is certified by a declaration of incorporati-

on (see page 14).

Further applicable EC directives:

Applied harmonized standards:

2.1

Observe the significance of the following symbol and note explanations. They are subdevided in security levels and classified

according to ISO 3864-2.

DANGER

WARNING

CAUTION

ADVICE

2.2

The actuator components are conform to the state of the art and apply as generally safe at the time they are shipped.

This manual serves as basis to install and operate ARIS actuators safety conform. All persons working with or on ARIS actuators

must observe this manual and especially its safety advices.

ADVICE

WARNING

EMC Directive 2004/108/EC

LVD (electrical safety)

MachDir

DANGER indicates a hazard with a high risk degree, which, if not avoided, causes death or

heavy injuries.

WARNING indicates a hazard with a medium risk degree, which, if not avoided, can cause

death or heavy injuries.

CAUTION indicates a hazard with a low risk degree, which, if not avoided, can cause slight

or moderate injuries.

Indicates general advices, useful hints and work recommendations, which don´t have

influence on the safety and health of the staff.

•

This manual has to be kept at the operating place at any time.

•

Read the manual carefully prior to installation and initial operation.

Certain parts of active electric appliances are obligatory under voltage.

DIN EN 61010-1:2011-07

DIN EN 12100:2011-03

LINEARIS