Aeon Labs D/W Sensor 매뉴얼 - 페이지 10

{카테고리_이름} Aeon Labs D/W Sensor에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs D/W Sensor 20 페이지. Door/window sensor

4. Put the Aeon Labs D/W Sensor to Sleep

After Being Included into a Z-Wave Network

The Aeon Labs D/W Sensor may be put to sleep by any of the

following methods below. Once the Aeon Labs D/W Sensor

has been put to sleep, the LED will no longer blink indicating

that it is now asleep and saving battery life.

4.1 Firmly tap the security switch on the back of the Aeon Labs

D/W Sensor 3 times in quick succession.

4.2 Trigger the Aeon Labs D/W Sensor with the magnetic unit

3 times in quick succession.

4.3 Send a Z-Wave sleep command (Z-Wave Wake Up

Command Class) from your controller/gateway to the Aeon

Labs D/W Sensor.