Aeon Labs MultiSensor 6 사용자 설명서 - 페이지 4
{카테고리_이름} Aeon Labs MultiSensor 6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs MultiSensor 6 10 페이지. Z-wave multisensor
페이지 인쇄Security
-
Command
Supported Report
Frame
2. Technical Specifications
Operating distance: Up to 500 feet/150 metres outdoors.
Operating temperature: 0
Relative humidity: 8%RH to 80%RH.
3. Familiarize Yourself with Your MultiSensor
3.1 Interface
4. All Functions of Each Trigger
4.1 Function of Z-Wave Button
Trigger
Click one time
1. Send non-security Node Info frame.
2. Add MultiSensor into z-wave network:
1. Power on MultiSensor. The MultiSensor's LED will blink slowly when you short press the Action Button.
2. Let the primary controller into inclusion mode (If you don't know how to do this, refer to its manual).
3. Press the Action Button.
4. If the inclusion is success, MultiSensor's LED will be kept turning on for 8 seconds when you short press the
Action Button. If the LED is still in slow blink, in which you need to repeat the process from step 2.
℃
to
40 .
℃
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_WAKE_UP,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_NOTIFICATION_V3,
COMMAND_CLASS_BATTERY,
COMMAND_CLASS_SENSOR_BINARY,
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_SECURITY,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Description