Dimplex VR45 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} Dimplex VR45에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex VR45 8 페이지. Quartzray vector range

FLOOR WALLS & CEILINGS

The minimum mounting heights are: -

Vector I and Vector RP 1.8M

Vector II

Vector III

(Also applies to apposite wall when wall mounted)

The above dimensions also apply to the distance

required to a side wall when suspended and a

distance of 1.0M is required to any end wall for

all heaters regardless of type of mounting.

Allow a minimum space above heaters of 150mm

to any overhang or ceiling. Do not locate heater

immediately below any socket outlet.

VECTOR 1

a. Wall mounting – screw back box to wall using

2 holes (see fig.2).

b. Bracket mounting – fit bracket to wall and back

Box to bracket (see fig.5).

c. Suspended mounting – remove 2 knockouts

(see fig.2) and suspend back box using conduit

or chain hooks.

VECTOR RP

Bracket mounting only – fit bracket to wall and

back box (cover support fitted) to wall bracket

(see fig.5).

VECTOR II & III

a. Wall mounting – screw back box to wall using the 2

or 3 holes provided.

b. Suspended mounting – suspend back box using

conduit or chain hooks.

Fit front assemblies to heater (see fig.7) and adjust

reflector angle to suit and on Vector RP, re-fit rainproof

heater.

INSTALLATION

2.5M

3.0M