Dimplex Wall Fire SP4 설치 및 운영 지침 매뉴얼 - 페이지 3
{카테고리_이름} Dimplex Wall Fire SP4에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex Wall Fire SP4 9 페이지. Dimplex indoor fireplace user manual
페이지 인쇄
- 1. Installation and Operating Instructions
- 2. Installation
- 3. Manual Operation
- 4. Manual Controls
- 5. Remote Control Operation
- 6. Menu Functions
- 7. Operating Instructions
- 8. Replacing the Remote Control
- 9. General Information
- 10. Important Battery Information
- 11. Lamp Replacement
- 12. After Sales Service
Manual Operation
The Standby Switch (Switch 1) must be first turned 'ON' and
the AUTO/MAN (Switch 2) switch set to 'MANUAL' to operate
the manual controls - see Fig 6.
Note : When the fire is put in Manual mode the first time the
flame effect will come on indicated by the Bottom neon coming
on for 3 seconds - see Fig 7.
Manual Controls
Setting
Operation
Flame Effect only
Press the ' I ' button (Switch 3)
Flame Effect & Heat On
Press the ' I ' button again (Switch 3)
To go to the previous settings press the ' O ' button (Switch
3).
To increase or decrease the brightness of the flames, use
the dimmer button (Switch 4). You can have any setting
between full brightness and the flames totally off. The heat
setting will remain the same.
To turn off the power the Standby Switch (Switch 1) must be
turned 'OFF'.
Note : Every time that manual mode is selected the previous
light and heat settings come on automatically.
MAN
AUTO
ON
OFF
Fig. 6
Indication
Top Neon
Bottom Neon
Neons for
indicating
operation level
Fig. 7