Dimplex XLS18N 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Dimplex XLS18N에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex XLS18N 8 페이지. Ultra-slim storage heaters
Dimplex XLS18N에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 운영 지침 (4 페이지), 운영 지침 (4 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

24. Fit the front bricks with the airways facing inwards.

26. Check that the damper mechanism within the heater

functions freely by rotating the left hand control knob.

Check also that the right hand (input) knob rotates freely.

28. Holding the bottom edge of the front panel towards

you, locate the top edge of the front panel in the groove at

the top of the heater.

25. Re-ﬁ t the inner front panel/insulation assembly,

ensuring the bottom edge of the panel is located behind

the base ﬂ ange. Make sure all screws removed in

Operation 18 are replaced securely.

27. Introduce mains supply cable through the cable clamp

into the terminal area, and connect in accordance with the

terminal markings. HEAT RESISTING CABLE MUST BE

USED (min. T85). Ensure that the cable is clamped so

that there is no excess cable in the terminal area. ON

NO ACCOUNT SHOULD ANY SURPLUS CABLE BE

PUSHED INSIDE OR BEHIND THE HEATER. CHECK

ALL ELECTRICAL CONNECTIONS FOR TIGHTNESS.

29. Push the bottom of the front panel towards the heater,

so that the bottom ﬂ ange locates under the base.