Aeon Labs AEOEZW062 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Aeon Labs AEOEZW062에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs AEOEZW062 12 페이지. Garage door controller

페이지 인쇄

Value

Get the number of alarm music. (Default)

Alarm Mode When Opening (Parameter Number 37, Parameter Size 4) Configure the alarm

mode for when the garage door is opening. Value1: configure the frequency of blinking for

the Alarm LED, there are 10 levels that 1 to10 level, the minimum frequency is level 1 and

the max frequency is level 10. Default is level 10. Value2: configure the alarm sound (there

are 4 types sound saved in EEPROM and user also can update it). Default is type 1. Value3:

configure the volume of alarm sound (there are 10 levels, the min volume is 1 level and the

max volume is 10 levels). Default is set to 8. Value4=0, disable the alarm prompt. Value4=1,

enable the alarm prompt.

Value

Configure the flash frequency of the alarm LED, there are 10 levels can be

1 — 10

set.

Select an alarm sound, there are 4 alarm sounds in the flash memory card can

256 — 356

be selected.

65535 —

Configure the volume of alarm sound, there are 10 levels can be set.

65545

16777215

Disable the alarm mode.

16777216

Enable the alarm mode.

Alarm Mode When Closing (Parameter Number 38, Parameter Size 4) Configure the alarm

mode when the garage door is closing. Value1: configure the frequency of blinking for the

Alarm LED, there are 10 levels that 1 to10 level, the minimum frequency is level 1 and the

max frequency is level 10. Default is level 6. Value2: configure the alarm sound (there are 4

types sound saved in EEPROM and user also can update it). Default is type 2. Value3:

configure the volume of alarm sound (there are 10 levels, the min volume is 1 level and the

max volume is 10 levels). Default is set to 8. Value4=0, disable the alarm prompt. Value4=1,

enable the alarm prompt.

Value

Configure the flash frequency of the alarm LED, there are 10 levels can be

1 — 10

set. (Default 6)

Select an alarm sound, there are 4 alarm sounds in the flash memory card can

256 — 356

be selected.

65535 —

Configure the volume of alarm sound, there are 10 levels can be set.

65545

16777215

Disable the alarm mode.

16777216

Enable the alarm mode.

Alarm Mode Unknown Position (Parameter Number 39, Parameter Size 4) Configuration

alarm mode when the garage door is in "Unknown" state: Value1: configure the frequency of

blinking for the Alarm LED, there are 10 levels that 1 to10 level, the minimum frequency is

level 1 and the max frequency is level 10. Default is level 4. Value2: configure the alarm

sound (there are 4 types sound saved in EEPROM and user also can update it). Default is type

3. Value3: configure the volume of alarm sound (there are 10 levels, the min volume is 1 level

and the max volume is 10 levels). Default is set to 8. Value4=0, disable the alarm prompt.

Value4=1, enable the alarm prompt.

Value

Description