Dimplex DCPF40GBLK 사용 설명서 - 페이지 6

{카테고리_이름} Dimplex DCPF40GBLK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex DCPF40GBLK 9 페이지. 40cm high velocity pedestal fan

OPERATION

BEFORE FIRST USE

•

Please read these instructions carefully before use and keep them for

future reference.

•

Check your local main voltage whether it is the same as stated on the

appliance.

•

Before using for the first time, remove any protective films or stickers

from the appliance and ensure the power switch is in the "0" position.

ASSEMBLY

1. Remove the pole fixing nut (16) from the main pillar (14) and insert the

main pillar (14) into the base (15) then tighten the fixing nut (16).

2. Release fixing screw B (13) and adjust height to a suitable length. Re-

tighten the fixing screw B once ready.

3. Release the fixing screw A (11), connect the motor housing with the

upper pillar (12), fasten it with the fixing screw A (11).

4. Remove the blade locking cap (2) and the guard knob (4) from the

motor shaft (6), secure the rear guard (5) on the motor housing (9) to

line up with the three fixing pins, fasten the guard with the guard knob

(4).

5. Put the blade (3) on the motor shaft (6) and tighten with the blade

locking cap (2).

6. Attach the front guard (1) to the rear guard (5), and close the guard

fixing clips, finally fastening with the safety screw (17).