Aeon Labs Aeotec 사용자 설명서 - 페이지 2

{카테고리_이름} Aeon Labs Aeotec에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs Aeotec 7 페이지. Home energy meter
Aeon Labs Aeotec에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 매뉴얼 (9 페이지)

페이지 인쇄
Aeon Labs Aeotec 사용자 설명서
10/19/2017
Your Panic Button has one button which can be used to control scenes as a secondary controller, or control Z-Wave
Dimmers and Switches directly.
Group Mode will allow the Panic Button to directly program a switch or a dimmer device using its button and directly
control them without a gateway or controller in between. This is set by default under Use Mode (Parameter 250 [1 byte] =
0).
Scene Mode will forward a Scene ID to your gateway, the gateway will process the command which you can use to control
a scene or event in your existing network. This can be set by setting Parameter 250 [1 byte] = 1. Not all gateways will work
with this type of command.

Quick start.

The first step to setting up your Panic Button is to power it up.
https://aeotec.freshdesk.com/support/solutions/articles/6000177086-panic-button-user-manual-
Panic Button user manual. : Aeotec by Aeon Labs
2/7