Dimplex GDC16RWA 유지 관리 안내 - 페이지 5
{카테고리_이름} Dimplex GDC16RWA에 대한 유지 관리 안내을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex GDC16RWA 11 페이지. Inverter portable air conditioner
Dimplex GDC16RWA에 대해서도 마찬가지입니다: 사용 설명서 지침 (9 페이지), 유지 관리 안내 (13 페이지)
페이지 인쇄
Dimplex inverter portable air conditioner trouble shooting and maintenance Guidance.
problem
cause
◆冷媒泄漏
五、无制冷
Malfunction in
Refrigerent leakage
cooling
◆压缩机故障
compressor problems
六、显示E1
◆室内温度传感器故障
room tempreture sensor
Display E1
errors
七、显示E2
◆室内盘管传感器故障
evaporator tempreture
display E2
sensor error
maintenance
maintenance methods
tool
★拆机，目测检查各管路
接口处是否有油渍流出，
如有证明油渍处冷媒泄
漏，需更换或补焊重新充
填冷媒。
discharge the unit, to test
十字螺丝刀
connection port of live
焊枪
parts wether any oil
真空泵
residues remains.if found
冷媒充填机
any signs of above,then
to replace it and solder
the connection port and
charge the refrigerent
★拆机，检查压缩机上电
后如不工作，机体不发
热，此时需更换。
discharge the unit.To
screwdriver,sold
check compressor
er tools,Vacum
working or not,or
Pump,Refrigeren
otherwise to replace the
t charge,
new one
★1.拆机，目测检查室内
温度传感器的插头是否牢
靠的插于主板CN10端子
座上，如否请重新插好固
to use screw
定牢固。
driver
★2.如重新插好仍显示
E1，此时需更换室内温度
传感器了。
1.Discharge the unit.to
check the tempreture
sensor integrate into
CN10 wiring terminal.
2.If display E1 after re-
plug, please to change
the tempreture sensor
★1.目测检查室内盘管传
感器的插头是否牢靠的插
于主板CN60端子座上，
十字螺丝刀 剪
如否请重新插好固定牢固
钳
★2.如重新插好仍显示
E2，此时需更换室内盘管
传感器了。
To check if tempreture
sensor connecting to
CN60 wether firmly
use screw
fixed,or otherwise to re-
driver,pincer
fix it.If E2 display, then to
replace the tempreture
sensor
important notes
※请送至专业的维修机
构维修。
send to qualified &
professional repair
service center
※维修人员需接上可靠
的接地，以免静电损坏
主板元件。
qualified technicians to
ensure the live parts to
be earth grounding to
protect the live parts
from being damaged
第4页/共6页