Aeon Labs Aeotec 사용자 설명서 - 페이지 3
{카테고리_이름} Aeon Labs Aeotec에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs Aeotec 11 페이지. Home energy meter
Aeon Labs Aeotec에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지), 매뉴얼 (9 페이지)
페이지 인쇄
17.09.2018
Power your Garage Door Controller by connecting the 5V DC Adapter to the input.
Now that your Garage Door Controller is powered on, you will see the Network LED blinking slowly. While the Network
LED is blinking, this indicates that the Garage Door Controller is ready to be included into a Z-Wave network.
2. Add/include/link your Garage Door Controller to a Z-Wave network.
The following instructions will tell you how to link your Garage Door Controller to your Z-Wave network via an Aeotec by
Aeon Labs' Z-Stick or Minimote controller. If you are using another Z-Wave controller as your main controller, please
refer to their respective manual on how add new devices to your network.
If you're using an existing gateway (ie. Vera, Smartthings, ISY994i ZW, Fibaro, etc):
You may need to refer to your gateway's method of including devices if you do not know how to pair a Z-Wave device.
1. Put your primary Z-Wave gateway into pair mode, your Z-Wave gateway should confirm that it is waiting to add a
new device
2. Press the Z-Wave Button on the Garage Door Controller. The LED on Garage Door Controller will blink rapidly,
followed by a solid LED for 1-2 second for a successful inclusion.
If you're using a Z-Stick:
https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-
Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs
3/11