Aeon Labs AEO MULTISENS 빠른 시작 매뉴얼

{카테고리_이름} Aeon Labs AEO MULTISENS에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeon Labs AEO MULTISENS 8 페이지. Z-wave motion sensor, temperature sensor, humidity sensor and lightness sensor in one package

페이지 인쇄

AEO_MULTISENS

Z-Wave Multisensor

Firmware Version : 1.18

Quick Start

This device is a Z-Wave Sensor. Single click the little button behind the battery cover to include or

exclude the device. Clicking the little button behind the battery cover will wake up the device and keep it

awake.

Please refer to the chapters below for detailed information about all aspects of the products usage.

Product description

The Aeon Labs Multisensor is a USB or battery-powered Z-Wave motion sensor, temperature sensor,

humidity sensor and lightness sensor in one package. The sensor will send radio signals up to 6 associated

Z-Wave devices within its own Z-Wave network when the sensor detects IR changes in front of its viewing

window. The Aeon Labs Multisensor complies with the IP43 standard so it can be used outdoors. By

adjusting the sensitivity of the sensor you can avoid the triggering due to small animals like dogs or cats.

The Aeon Labs Multi Sensor is delivered with a swivelling Back-Mount Arm for wall mount and a Back-

Mount Plate for ceiling mount.

Installation Guidelines

1. Release the Multisensor from the mounting by rotating it counterclockwise (sign: "Lock"/ "Unlock")

2. Put the 4 AAA batteries in the battery compartment.

3. The sensor can be mounted as follows:

(a) For wall mount use the screws with the swivelling Back-Mount Arm. Further fix the sensor with Back-

Mount Plate like shown in the picture.