Pioneer AVG-VDP1 설치 매뉴얼 - 페이지 12

{카테고리_이름} Pioneer AVG-VDP1에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVG-VDP1 30 페이지. Vehicle dynamics processor
Pioneer AVG-VDP1에 대해서도 마찬가지입니다: 매뉴얼 (39 페이지)

페이지 인쇄

Installation

Installing this unit

1. Attach the side brackets to this unit.

When this unit is installed on the floor or

the installation board under the passenger

seat, etc., the side brackets should be

attached to the unit.

Use the following holes in the side

brackets.

If the positions of the side plates

are shifted in parallel you can also

use other holes that match up with

the holes in this unit.

This unit

Side bracket

When this unit is installed under the pas-

senger seat, etc., use the installation board.

2. Decide on the installation position,

Washer faced

screw (4 × 8 mm)

3. Secure it firmly using the self-tap-

and drill the holes.

Installation board

Drill holes of between

4 and 4.5 mm in

diameter.

ping screws.

Self-tapping screw

(6 × 16 mm)

Mark up the positions for

drilling the holes.