Pioneer AVH-P6800DVD - DVD Changer With LCD Monitor 설치 매뉴얼 - 페이지 2
{카테고리_이름} Pioneer AVH-P6800DVD - DVD Changer With LCD Monitor에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-P6800DVD - DVD Changer With LCD Monitor 9 페이지. Owner's manual
Pioneer AVH-P6800DVD - DVD Changer With LCD Monitor에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 설치 매뉴얼 (8 페이지)
페이지 인쇄
Connecting the Units
Connecting the Units
Connecting the power cord
IP-BUS input (Blue)
16 cm
Violet/white
Refer to Fig. 4.
IP-BUS cable
This product
Multi-CD player
(sold separately)
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Red
Fuse resistor
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO
Orange/white
DETECT PARKED STAT
Fuse resistor
To lighting switch terminal.
POWER SUPPL
CONNECTION OR USE OF
LAW
LA
Yellow
Fuse holder
Light green
To terminal always supplied
(10 A)
Used to detect the ON/OFF status of the parking brake.
with power regardless of
This lead must be connected to the power supply side of the parking
ignition switch position.
brake switch.
Black (ground)
To vehicle (metal) body
Gray
White
+
+
Front speaker
Front speaker
≠
≠
Gray/black
White/black
Left
Right
Violet
Green
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
AUX input jack
20 cm
Antenna cable
15 cm
Connection method
1.
Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
WARNIN
W
WARNIN
G
T
TAT
US AND MUST BE CONNECTED TO THE
WE
L
LY SIDE OF
Y SIDE OF
THE PARKING BRAKE SWITCH. IMPROPER
ON
THIS LEAD MAY
A VIOLATE
AY
ATE
A
APPLICABLE
A AND MAY RESU
AW
AY RESU
A
LT IN SERIOUS INJURY OR DAMAGE.
Power supply side
Ground side
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
When you connect the separately sold multi-channel processor
(DEQ-P8000) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
When connecting to separately sold power amp
This product
2. Clamp firmly with
f
firmly with
needle-nosed
pliers.
Parking brake
switch
Fig. 2
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23cm
Front output
(FRONT OUTPUT)
15cm
Rear output
(REAR OUTPUT)
15cm
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
When you connect the separately sold
multi-channel processor (e.g. DEQ-P8000)
to this unit, do not connect anything to the
speaker leads and system remote control
Front speaker
(blue/white).
Note :
When you connect the multi-channel processor
to this unit, a separately sold power amp must
Rear speaker
be connected to the multi-channel processor.
Left
Note :
Subwoofer
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
<ENGLISH>
<ENGLISH>
Power amp
(sold separately)
Power amp
(sold separately)
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
System remote control
Blue/white
+
+
Front speaker
≠
≠
+
+
Rear speaker
≠
≠
Right
+
+
Subwoofer
≠
≠
Perform these connections when using the
optional amplifier.
Fig. 3