Pioneer AVH-Z3200DAB 시스템 펌웨어 업데이트 지침 - 페이지 2
{카테고리_이름} Pioneer AVH-Z3200DAB에 대한 시스템 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-Z3200DAB 3 페이지. Dvd rds av receiver
Pioneer AVH-Z3200DAB에 대해서도 마찬가지입니다: 설치 매뉴얼 (49 페이지)
페이지 인쇄
3. Scroll down the list and touch [System Information], next touch [Firmware Information].
4. After the "Firmware Information" screen appears, check the firmware version number.
5. If the firmware version is 8.04 or higher, it is not necessary to update the firmware. If the
version number is lower than 8.04, it is necessary to update the firmware. Please continue
to Step B.
B. Downloading the Firmware Update Files from Pioneer's website
NOTE: If you have any difficulty performing these instructions, please contact Pioneer
Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower
version.
1. Download the correct file "AVH-Zx200BT_ DAB_FW_Ver_804.zip" - from the
website to a folder on your computer.
2. Double click the ZIP file named to open it.
3. Extract and save the folder "CVJ3247-B.AVH" to a folder on your computer.
C. Updating the firmware on your Unit
IMPORTANT
DO NOT perform any further steps of this firmware update if the model number is anything
other than one of the above models.
Disconnect any mobile devices that are currently connected to your unit.
Ensure that the update file is located within the root (top) folder of your USB storage device.
There should be no other files on the USB storage device.
While your unit is being updated, DO NOT turn off the system's power and DO NOT touch
the unit's touch panel screen as this may result in severe damage to your unit.
DO NOT remove the USB storage device during the firmware update.
Performing the firmware update will restore all settings to their default values.
Procedure:
1. Connect a blank (formatted in FAT32) USB storage device to your computer, next locate
the correct update file (CVJ3247-B) and copy it onto the USB storage device
2. Connect the USB storage device to the USB port
3. Set the audio source to "OFF" on your unit.
4. Press the HOME button to display the Top menu screen.